Light Fixture Supplies: Choose From Many Options
The wire nuts will need to be loosened on the lights fixtures as they hold all the wires in one place. To remove, turn the caps counterclockwise and separate the wires from each other. Carefully remove the old fixture to the ground and begin to replace the mounting bracket. It's recommended to replace the old bracket with the new fixture's rectangular mounting. A casting may also need to be secured to the ceiling and fastened to the fixture. It's best to follow the new fixture's proper instructions to install the light correctly. The wires will need to be identified and separated into two neutral wires to go inside the fixture and ceiling, with a half inch of the copper wires twisted with the neutral to create a strong lighting connection. Then the same method should be followed with the black hot wires. After secured, a wire nut should be screwed on to keep the wires and fixture together.
Next long screws will need to be installed into the ceiling so that they firmly hold your brand new ceiling light fixture. With a helpful friend, have them hold the fixture while the screws are twisted into the holes and inserted into the new fixture. Also, brand new light bulbs should be screwed into the lighting fixture. Last after all steps have been completed, the electric panel should be turned on, the flip should be switched, the ambiance will illuminate the room and all should be in good working order.
